Тип:
QEH15CA
Номер на продукт:
5-000637
Размери
Моменти
| Dimensions | |||
|---|---|---|---|
| H | Total height | 24 | mm |
| H1 | 4 | mm | |
| N | 9,5 | mm | |
| W | Block width | 34 | mm |
| B | 26 | mm | |
| B1 | 4 | mm | |
| C | 26 | mm | |
| L1 | 39,8 | mm | |
| L | Block length | 56,8 | mm |
| K1 | 10,15 | mm | |
| K2 | 3,5 | mm | |
| G | 5,7 | mm | |
| M | M4 | ||
| l | 6 | mm | |
| T | 6 | mm | |
| H2 | 5,5 | mm | |
| H3 | 6 | mm | |
| Mass | 0,15 | kg | |
| Load ratings and torques | |||
|---|---|---|---|
| Cdyn | Dynamic load rating | 12530 | N |
| C0 | Static load rating | 15280 | N |
| M0X | Static moment | 120 | Nm |
| M0Y | Static moment | 90 | Nm |
| M0Z | Static moment | 90 | Nm |
Static load rating C0
If a linear guideway system is subjected to excessive loads or impacts during movement or at a standstill, localised permanent deformation occurs between the track and balls. As soon as this permanent deformation exceeds a certain level, it affects smooth operation of the guideway. According to its basic definition, the static load rating corresponds to a static load that causes permanent deformation of 0.0001 × ball diameter at the contact point that is loaded the most. The values are given in the tables for each linear guideway system. Using these tables, the designer can select a suitable linear guideway system. The maximum static load to which a linear guideway system is subjected must not exceed the static load rating.
Permissible static moment M0
The permissible static moment is the moment which, in a defined direction and size, corresponds to the maximum possible load on the moving parts by the basic static load rating. The permissible static moment is defined for linear motion systems for three directions: MX, MY and MZ.
Long-term lubrication unit E2
The long-term lubrication unit extends the relubrication intervals significantly. Depending on the application and ambient conditions this can last for the entire service life. It also significantly reduces the amount of lubricant that is used as only the required amount of lubricant is applied. The compact design and special structure mean that the block can be installed in any position without having an impact on the lubricating effect. The long-term lubrication unit can be used at an ambient temperature of -10°C to +60°C.
| Обозначение | Категория | Продукт | Размер | Език |
|---|---|---|---|---|
| Водач за профилни шини | Каталог | Водач за профилни шини | 7 MB | |
| Водачи за профилни шини CG | Флаер | Водач за профилни шини | 299 KB | |
| Водач за профилни шини | Инструкции за монтаж | Водач за профилни шини | 4 MB | |
| Водач за профилни шини | Проектна спецификация | Водач за профилни шини | 2 MB |
Монтаж и демонтаж на капаците
??????????? ??????? ?? ?????????, ?? ?? ????????? ?????????? ?????? ?? ?????????? ???? ?? ??????? ? ????????????. ? ???? ????? ?? ?? ??????? ??? ????? ?? ????????? ? ??????? ?????????, ????????? ??? ??????????? ???????.
Машинно или ръчно скосяване
? ?????????? ????? ?????? ?? ?????? ??? ?? ???????? ????????? ?? ?????? ?? ?????? ?? ???????? ???? ????? ?????????, ???? ? ?????.
Съпротивление на преместване в зависимост от условията на смазване
??????????????? ?? ??????????? ?? ???????? ???? ?????? ?? ????? ???????, ???? ???????? ???????????, ???????????, ???????? ???????? (????, ????? ????, ?????), ?????????? ???????? ????????, ??????? ?? ????????, ?????, ?????? ??? ???????????? ???????. ????????????, ????????? ????????? ?? ??????????????? ?? ??????????? ? ???????? ???? ??? ?????????? ??????? ???????. ????? ?????? ??? ? ?????????? ???????? ? ??????????? ?? ??????????. ??????? ? ?????? ??????? ????????? ??????????????? ?? ??????????? ?? ????????? ??????????. ?? ???? ???? ???? ?? ???????????? ?? 15 ????? ??????????????? ?? ??????????? ???????? ?????? ? ????? 50%.
Принцип на работа на водач за профилни шини
????? ?? ???????? ???? ????????? ??????? ???????? ? ??????? ?? ????????? ????????. ???? ???????????? ?? ????? ??? ????? ????? ??????? ? ???????? ???? ??????? ?? ???????? ???? ???? ?? ???????? ???????????? ???????? ??????? ????????.
Устройство за дългосрочно смазване на водач за профилни шини
???????????? ?? ??????????? ???????? ?? ???????? ?? ???????? ???? ????????? ??????????? ??????????? ?? ??????????? ?? ???????? ? ?? ???? ????? ?????????? ?????????? ?? ???? ?? ??????????? ?? ?????????? ??????????. ? ?????????? ?? ???????????? ?? ???? ?????? ???? ????? ?? ?? ???????? ?? ??? ?????????? ?? ??????????? ????????.
Водач за профилни шини – смазване с грес чрез смазващ нипел
? ?????????? ????? ?????? ?? ?????? ??? ??????? ?? ??????? ????? ???? ?? ?? ??????? ????? ???????? ???? ?? ????? ?? ???????? ????. ???? ???????? ?? ??????? ????????, ?????????? ?? ????????. ?????????? ???????? ?????????? ????????? ???????????, ?????????? ?????????? ?? ??????????? ? ?? ???? ????? ????????? ???????????????? ?? ?????. ?????????? ???????? ? ????????????? ??????? ? ???????????? ?????? ?? ?? ????? ??????? ??? ????????????? ?? ?????? ??????. ????? ????? ???????? ?????, ???????? ?? ???????? ???? HIWIN ???????? ?????????? ?????????? ???????? ????????. ?? ??????? ? ???????? ???????? ????? ? ????, ???? ? ? ?????.