Skip to content Skip to navigation menu
Type:
HT100LA01
Configure
CAD
Data sheet
Data sheet

HT100LA01

www.www.hiwin.fr
Sizing

Dimensions

Max. acceleration amax depending on the external payload mext

Deflection w over unsupported axis length LAW under payload

Dimensions
Lc Total carriage length 255 mm
B Switch position 113,5 mm
C Switch position 37 mm
LT Total length LT = LST + 319 mm
Load data
Fydynmax Ultimate force 1101 N
Fzdynmax Ultimate force 1101 N
Mxdynmax Maximum torque 35 Nm
Mydynmax Maximum torque 96 Nm
Mzdynmax Maximum torque 96 Nm
z Upper carriage edge to guiding centre 53,3 mm
General technical data
vmax Max. speed 5 m/s
amax Max. acceleration 50 m/s²
Load capacity 20 kg
Maximum total length 5830 mm
Repeatability ± 0.005 mm
Flatness ± 0.03 mm/300 mm
Straightness ± 0.03 mm/300 mm
Ix Area moment of inertia of profile cross-section 282903 mm⁴
Iy Area moment of inertia of profile cross-section 1541419 mm⁴
Guiding
Guiding type MGN09H
Cdyn Dynamic load rating 2550 N
C0 Static load rating 4020 N
Drive
Linear motor LMSA01
Continuous force 52 N
Peak force 112 N
Mechanical properties
Carriage mass 1,97 kg
Mass at 0 stroke 4,15 kg
Mass per 1 m stroke 6,45 kg/m
Fl Carriage displacement force 2 N
Details
Cover strip
The steel cover strip prevents dirt and dust from entering the axis interior. In addition, the cover strip allows the axes to be used in areas with coarse, sharp-edged or hot foreign bodies. The magnetic strips integrated in the axis profile hold the belt securely in position and increase the sealing effect.
Lubrication
For convenient maintenance of the linear axis, a separate grease nipple is fitted to the left and right of the carriage for each lubrication point. This ensures optimum accessibility for relubrication, even under difficult installation conditions. For further information on lubrication and maintenance, please refer to the assembly instructions.
Accessories
Name Article number Description  
Tape for reduction of noise emissions from the energy chain 25-002485 Band zur Geräuschreduktion der Energiekette  
Name Article number Description  
Limit switch, 4 m cable (NC) 25-000787 Endschalter  
Name Article number Description  
Motor cable HT-L, 915, 9-pin, open end, 3 m 8-10-1214 Motorleitung  
Motor cable HT-L, 915, 9-pin, open end, 5 m 8-10-1215 Motorleitung  
Motor cable HT-L, 915, 9-pin, open end, 10 m 8-10-1217 Motorleitung  
Motor cable HT-L, 915, 9-pin, open end, 8 m 8-10-1216 Motorleitung  
Motor cable HT-L, 915, 9-pin, open end, 15 m 8-10-1218 Motorleitung  
Encoder cable incremental and absolute, open end, 10 m 8-10-1210 Encoderleitung  
Encoder cable incremental and absolute, open end, 5 m 8-10-1208 Encoderleitung  
Encoder cable incremental and absolute, open end, 3 m 8-10-1207 Encoderleitung  
Enc. cable abs. Springtec 915 15pol 8m 8-10-1209 Encoderleitung  
Encoderl. abs. Springtec 915 15pol 12m 8-10-1211 Encoderleitung  
MAGIC encoder cable incremental with Hall effect sensor, open end, 10 m 8-10-1204 Encoderleitung  
MAGIC encoder cable incremental with Hall effect sensor, open end, 5 m 8-10-1202 Encoderleitung  
MAGIC encoder cable incremental with Hall effect sensor, open end, 3 m 8-10-1201 Encoderleitung  
Encoder cable 915 15-pin, analogue, 3 m 8-10-1838 Encoderleitung  
Encoder cable 915 15-pin, analogue, 5 m 8-10-1839 Encoderleitung  
Encoder cable 915 15-pin, analogue, 8 m 8-10-1840 Encoderleitung  
Encoder cable 915 15-pin, analogue, 10 m 8-10-1841 Encoderleitung  
Encoder cable 915 15-pin, analogue, 12 m 8-10-1842 Encoderleitung  
Encoder cable 915 15-pin, analogue, 15 m 8-10-1843 Encoderleitung  
Encoder cable 915 15-pin, TTL, 3 m 8-10-1844 Encoderleitung  
Encoder cable 915 15-pin, TTL, 5 m 8-10-1845 Encoderleitung  
Encoder cable 915 15-pin, TTL, 8 m 8-10-1846 Encoderleitung  
Encoder cable 915 15-pin, TTL, 10 m 8-10-1847 Encoderleitung  
Encoder cable 915 15-pin, TTL, 12 m 8-10-1848 Encoderleitung  
Encoder cable 915 15-pin, TTL, 15 m 8-10-1849 Encoderleitung  
Encoder cable 915 15-pin, absolute, E1, 3 m 8-10-1850 Encoderleitung  
Encoder cable 915 15-pin, absolute, E1, 5 m 8-10-1851 Encoderleitung  
Encoder cable 915 15-pin, absolute, E1, 8 m 8-10-1852 Encoderleitung  
Encoder cable 915 15-pin, absolute, E1, 10 m 8-10-1853 Encoderleitung  
Encoder cable 915 15-pin, absolute, E1, 12 m 8-10-1854 Encoderleitung  
Encoder cable 915 15-pin, absolute, E1, 15 m 8-10-1855 Encoderleitung  
Name Article number Description  
Set Bedämpfungselement HT 25-001031 Bedämpfungselement  
Downloads
Name Category Product Size Language
Linear axes and axis systems HX Catalogue Linear axes & linear axis systems 13 MB
Linear motor axes HT-L, HB-L Assembly Instructions Linear axes & linear axis systems 2 MB
Linear axes HM, HT, HB, HD Project planning sheet Linear axes & linear axis systems 285 KB
Go to download centre
HIWIN HX: One axis family – countless possibilities
An innovative design, two designs, three drive types and countless possibilities. The bendable HIWIN HX axis system offers the right solution for your ideas.
Installation of the limit switches and adjustment of the switching distance for HIWIN linear axes
The limit switches or additional reference switches are quick and easily to install in HIWIN linear axes, and positioning is continuously variable. The switching distance to the damping element can be set easily using a feeler gauge. We’ll show you how in this video. Tools/Equipment recommendation: - 6-edged offset screwdriver set, feeler gauge, scale, assembly instructions.
Cover strip change in a linear table HT
The cover strip can be changed quickly and easily in the HIWIN HT linear tables. We’ll show you how in this video. Tools/Equipment recommendation: 6-edged offset screwdriver set, cut-resistant gloves, permanent marker, bracket, tin snips, lint-free cloth, assembly instructions.