Dimensions
Max. acceleration amax depending on the external payload mext
Deflection w over unsupported axis length LAW under payload
| Dimensions | |||
|---|---|---|---|
| Lc | Total carriage length | 385 | mm |
| A | Cover strip deflection | 47,5 | mm |
| B | Switch position | 185,5 | mm |
| C | Switch position | 120,5 | mm |
| LT | Total length | LT = LST + 475 | mm |
| Load data | |||
|---|---|---|---|
| Fydynmax | Ultimate force | 3350 | N |
| Fzdynmax | Ultimate force | 4270 | N |
| Mxdynmax | Maximum torque | 201 | Nm |
| Mydynmax | Maximum torque | 414 | Nm |
| Mzdynmax | Maximum torque | 625 | Nm |
| z | Upper carriage edge to guiding centre | 51,5 | mm |
| General technical data | |||
|---|---|---|---|
| vmax | Max. speed | 5 | m/s |
| amax | Max. acceleration | 60 | m/s² |
| Load capacity | 80 | kg | |
| Maximum total length | 5830 | mm | |
| Repeatability | ± 0.005 | mm | |
| Flatness | ± 0.03 | mm/300 mm | |
| Straightness | ± 0.03 | mm/300 mm | |
| Ix | Area moment of inertia of profile cross-section | 907754 | mm⁴ |
| Iy | Area moment of inertia of profile cross-section | 7417610 | mm⁴ |
| Guiding | |||
|---|---|---|---|
| Guiding type | QEH15CA | ||
| Cdyn | Dynamic load rating | 12530 | N |
| C0 | Static load rating | 15280 | N |
| Drive | |||
|---|---|---|---|
| Linear motor | LMSA12 | ||
| Continuous force | 205 | N | |
| Peak force | 579 | N | |
| Mechanical properties | |||
|---|---|---|---|
| Carriage mass | 4,3 | kg | |
| Mass at 0 stroke | 11,13 | kg | |
| Mass per 1 m stroke | 13,59 | kg/m | |
| Fl | Carriage displacement force | 4 | N |
Cover strip
The steel cover strip prevents dirt and dust from entering the axis interior. In addition, the cover strip allows the axes to be used in areas with coarse, sharp-edged or hot foreign bodies. The magnetic strips integrated in the axis profile hold the belt securely in position and increase the sealing effect.
Lubrication
For convenient maintenance of the linear axis, a separate grease nipple is fitted to the left and right of the carriage for each lubrication point. This ensures optimum accessibility for relubrication, even under difficult installation conditions. For further information on lubrication and maintenance, please refer to the assembly instructions.
| Name | Category | Product | Size | Language |
|---|---|---|---|---|
| Linear axes and axis systems HX | Catalogue | Linear axes & linear axis systems | 13 MB | |
| Linear motor axes HT-L, HB-L | Assembly Instructions | Linear axes & linear axis systems | 2 MB | |
| Linear axes HM, HT, HB, HD | Project planning sheet | Linear axes & linear axis systems | 285 KB |
HIWIN HX: One axis family – countless possibilities
An innovative design, two designs, three drive types and countless possibilities. The bendable HIWIN HX axis system offers the right solution for your ideas.
Installation of the limit switches and adjustment of the switching distance for HIWIN linear axes
The limit switches or additional reference switches are quick and easily to install in HIWIN linear axes, and positioning is continuously variable. The switching distance to the damping element can be set easily using a feeler gauge. We’ll show you how in this video. Tools/Equipment recommendation: - 6-edged offset screwdriver set, feeler gauge, scale, assembly instructions.
Cover strip change in a linear table HT
The cover strip can be changed quickly and easily in the HIWIN HT linear tables. We’ll show you how in this video. Tools/Equipment recommendation: 6-edged offset screwdriver set, cut-resistant gloves, permanent marker, bracket, tin snips, lint-free cloth, assembly instructions.