Type :
C4-M
Numéro de référence :
5-001344
Dimensions
| General technical data | |||
|---|---|---|---|
| For profile rails | HGR15R, CGR15R, EGR15U, WER17R, WER21R, WER27R, RGR15R | ||
| Material | Brass (M) | ||
| Screw | M4 | ||
| D | Diameter | 7,5 | mm |
| H | Height | 1,2 | mm |
| Désignation | Catégorie | Produit | Taille | Langue |
|---|---|---|---|---|
| Linear guideways | Assembly Instructions | Linear guideways | 4 MB | |
| Linear guideways | Project planning sheet | Linear guideways | 2 MB | |
| Linear guideways | Catalogue | Linear guideways | 7 MB | |
| CG linear guideways | Flyer | Linear guideways | 299 KB |
Principle of operation of a linear guideway
A linear guideway makes it possible to move in a linear motion with rolling elements. The use of balls and rolls between the rail and block in a linear guideway makes precise linear movements possible.
E2 long-term lubrication unit of a linear guideway
The E2 long-term lubrication unit for our linear units of series HG/QH, RG and EG/QE make it possible to greatly lengthen lubrication intervals, thereby reducing the number of maintenance cycles. The oil in the lubrication tank is pumped to the lubrication plate via the connecting piece (capillary effect). The oil is dispensed onto the profile rail via the contact surfaces of the lubrication plate.
Assembly and disassembly of cover caps
The cover caps are used to keep the mounting holes of the profile rails free of chips and dirt. In this video, we show you how to easily assemble and disassemble steel, brass or plastic cover caps.